Three Key Points to Help You Choose the Right Tires for Your Motorcycle and Your Riding Style

Selecting the right tires for your motorcycle to replace worn or damaged tires is a critical decision.

But, many riders go as long as three or four or even more riding seasons before they must replace worn tires. So choosing new tires that best suit your motorcycle as well as your riding style can be an unfamiliar process.

Here are three key points to help you choose tires that support your motorcycle’s performance capabilities and meet your riding demands…

1) What tires came with your bike?

The folks who built your motorcycle equipped it with tires that enable it to meet its full design and performance potential.

So the best place to start — and possibly finish — your tire selection process, is to consider replacing your worn tires with the same make and model tires the motorcycle manufacturer used in the first place.

At least you can use the current tires as your baseline when determining the most appropriate tires for your bike and for the way you ride.

2) Don’t mix bias ply and radial tires

Radial tires have layers of internal support material running side to side from one bead (tire edge) to the other at a right angle to each bead.

Bias ply tires have plies of internal support material running from one bead to the other at about a 30 degree angle. One ply is set on a bias in one direction as succeeding plies are layered alternately in opposing directions.

With both radial and bias ply tires, the underlying support layers are covered with rubber to form the tire tread.

Bias ply and radial motorcycle tires react to and manage your motorcycle’s steering, braking and acceleration forces differently.

Your motorcycle was designed to perform best with a specific type of tires. That’s why you’ll be on target by selecting make and model tires similar to those fitted originally to your motorcycle — radial or bias ply.

Your front and rear tires should be the same brand and model. Two tires with mismatched tread patterns will not perform properly together.

3) Match your tire’s tread pattern and rubber compound to your riding style

What kind of rider are you?

  • Do you ride fast and corner deep?
  • Do you log on many miles during long tours?
  • Do you ride year-round, rain or shine?

A tire’s tread pattern and rubber compound determine a tire’s capabilities and potential regarding speed, mileage and ability to hold the road. They determine what you can get out of a tire.

Touring and cruising tires use relatively hard rubber compounds. They are designed to give you high tire mileage and good gas mileage. But they’re not the best for the highest speeds and aggressive cornering.

Sport bike and racing tires use relatively soft and “sticky” rubber compounds. They provide good traction for deep cornering. But you give up long tire life and extended gas mileage for “knee-dragging” cornering capabilities.

A tire’s tread design determines the best road and weather conditions for that tire.

A slick racing tire will give you great high-speed traction. But you don’t want such a tire for touring and riding in the rain.

For wet weather you need a tire with a deep water-dispersing tread for the best wet-road traction.

General-use tires are made from a medium-hard rubber compound and feature a light tread. This combination gives you high mileage and a stable ride on a wide variety of roads during all sorts of weather.

Give some thought to…

  • Where and when you like to ride…
  • Your abilities as a motorcycle rider…
  • Your motorcycle’s design capabilities…

…and use your results to determine which motorcycle tires will best suit you and your motorcycle.

A Motorcycle Gear Check Will Keep You Safe

While the wind and snow blow outside, it’s likely that you’re itching to get back on your bike. It may feel like those warmer spring months will never come, but they will, and you’ll be out their riding again soon enough. While you’re waiting though, you can do something that will both make your riding experience more enjoyable, and make yourself safer. While you’re not using your gear, it’s time to go inspect it, and make sure it’s all up to snuff. What isn’t, you should replace. Take advantage of the off season and do a motorcycle gear check.

When you begin your motorcycle gear check, the first thing to inspect is your helmet. Your helmet is the piece of safety gear that will make or break your survival should you be involved in an accident. You will first want to think back on whether or not your helmet has fallen at all, even if it’s just from as far as your handlebars. If so, this means that you should replace it before you ride again. Any fall will damage the foam inside the helmet, designed to protect your brain from shock. You want that foam perfectly intact, every time that you ride.

As you’re doing your motorcycle gear check, you’ll also need to do a visual and manual inspection of your helmet. This will let you know about any damage you may have missed. Look over the helmet for dents or deep scratches, and feel along it for the same. These are both signs that your helmet has been damaged, and it’s time for a new one. If you find issues with the internal padding, designed for your comfort, you can get it replaced without getting a whole new helmet.

The next part of your motorcycle gear check should be your jacket. This is a piece of gear that is second in importance only to your helmet. Should you be thrown from your bike, your jacket is what will help to keep your upper body protected. First, make sure that it’s made out of the right material, either tough leather or another strong and thick material that is resistant to tears. If it does have any tears, make sure that they are repaired before you’re back on the road.

When you’re getting close to the end of your motorcycle gear check, it’s a good time to make sure that your more minor, but still important, pieces of gear are in order. These include your gloves, boots, and your leather riding pants. Each of these things will add not only to your safety, but also to your comfort.

A motorcycle gear check is a great way to make sure that when you’re ready to ride in the spring, all of your gear is safe and ready for you. Take advantage of the time you have now to make sure that everything is in proper working order, so that you’ll be safe on the road. If a piece of gear is damaged, make sure that you replace it.

5 Tips For Choosing the Right Motorcycle Jackets & Motorcycle Trousers

Challenges of all types are all around nowadays and people must face them daily. The human spirit is tested daily as we must manage these numerous challenges One challenge that numerous people must face is choosing the right motorcycle clothing. There are usually experts researching most challenges, trying to find good ways of managing them. To find the best results, what do you need to do?

The following are 5 effective tips for choosing the right motorcycle equipment:

1. Safety, the motorcycle jackets & motorcycle trousers you choose have to be safe. When riding the clothes you wear are your primary protection against both the elements and accidents. The manufactures will usually post a safety rating on the clothing to tell you how much protection you will have. If you follow these safety ratings you will end up with quality safe clothing.

2. Comfort, this has to be the most important tip in choosing any kind of equipment. This is very important because clothes that don’t fit well and comfortably are just not worth wearing and no matter what type of new technology the clothes may support, if you are going to wear them for long periods of time they have to be comfortable.

3. Style, The reason for this is lets face it one of the main things we as consumers consider when buying motorcycle jackets & motorcycle trousers is how we look in them. It is also a good idea because the better we look the more we will use the motorcycle jackets & motorcycle trousers and get our monies worth.

4. Make sure its waterproof. On a long trip the last thing you want is to have clothing that is not waterproof in a rain storm. Most motorcycle jackets & motorcycle trousers are waterproof but there are a few that aren’t so be vigilant when buying.

5. Custom Fit. This is more of an option than a requirement but going back to style the better the clothing fits the better they will look and the more use you will get out of them and nothing feels better than clothes that fit the body perfectly.

Just carefully stick to the 5 tips above and you may expect great results in choosing the right motorcycle jackets & motorcycle trousers. You may then expect to have all the joys, benefits and fruits that those good results provide you with. If you ever ignore these 5 tips, prepare yourself for much worse results and concurrently lower benefits.